Click on the image to check the artwork
By certification 
HEV-J-Q/1000VDC/1000VAC or below
Rated Current |
5A-800A |
Interrupting Capacity |
DC20KA/AC50KA |
Rated Voltage |
500VDC/500VAC |
Other Capacity |
|
Certificates |
UR,UL(applying) |
Flame Retardancy |
UL94-V0(Non-flammable) |
Protection type |
aR |
Environmental protection |
RoHS, Reach |
Packing:
Model: HEV-P-Q-HT3-300A
Carton Label:
Piece Weight: 246±5g
Carton Dimension: L.274*W.225*H.230mm
Inner Box Dimension: L.225*W.140*H.50mm
Net Weight/Carton: 12.3kg
Gross Weight/Carton: 13.5kg
Carton Dimension:14180cm3
Product anatomy
Product Applications
Test Equipment
Our Certificates
Question: If I am using the Junction Box, that has two 4.7" Flexible LED Strips, and two Superflux 4-chip LED's hooked up to it. Then a rocker switch hooked up through the power wire. What fuse will I need?
And do I just put the fuse holder "after" the switch, then the rest of the wire to the battery? If that’s right.
Answer: I'd put a 3 amp fuse close to the battery.
Question : If I’m using an add-a-fuse accessory wired to the fuse box do i need to use an inline fuse or is the fuse in the add-a-fuse enough?
Answer: As long as you are fusing your LED products to something, be it the fuse box or an add-a-fuse you will be ok. One fuse is enough.
Question: If the draw of the products I am purchasing is about 400 mA, which amp rating should I choose for a fuse?
Answer: A 1-3Amp fuse will be sufficient.
http://www.dissmannfuse.com/
